First off, this guide is going to guide you through on the steps you need to add faster turbo/turbo to pre existing turbo controllers and non turbo controllers through script writing. This option may not be accessible to everyone, but those who are interested in script writing here is the setup:
First thing that you need to do:
-Go into System Settings and select Pro Wired communication
-Go into System Settings and select Remap controls
-Remap the following: Dpad Up=Y,
This is so we can have our turbo Y Button for later!
The Materials.
Titan two device
Titan two expansion kit (For BT Capabilites)
Any Third party nintendo switch controller (Or any controller compatible with the Titan Two)
2 USB-C Cables (One already comes with the expansion kit)
Setting up the device
Insert the SD Card that came with the expansion kit in the “Micro SD” Slot
Insert The BT Module inside the titan two
Plug the USB-C Cable that has the Icon into the “PROG” outlet.
Plug your other USB-C Cable into the output outlet (This is what connects to the switch)
Download the Gtuner Software (This is what we need to write the scripts)
After Downloading Gtuner on your PC, here is what you want to do:
Extract the files to a folder for the software
Open Gtuner.
Before DOING ANYTHING ELSE, Update the firmware. If the firmware is up to date, you are good and can ignore this part of this step.
Writing The Script
-In Gtuner, click on File>New>Minimum GPC Script.
-Have a dedicated folder for Scripts on your PC, and save the script to that folder.
-On the section called output panel, there is a tab above that called GPC Script IDE. Click on that
-Pasting the script
-Now that you have completed that step, Copy this script and paste it into Script CPC.
-Now Save this script into memory slot 1. You have now successfully have managed to do 20 Hz Turbo On any controller!
-Additonally, to adjust the turbo speed simply change the Ms. The highre the Ms the lower the turbo Hz.